|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SF1083B 286 MHz SAW Filter * * * * Designed for GSM BTS Transmitter Applications Low Insertion Loss and Small Size 8.5 x 5.8 mm Surface-Mount Case Unbalanced Input and Output Characteristic Nominal Center Frequency Passband Insertion Loss at fc 3 dB Passband Amplitude Ripple over fc 75 kHz Group Delay Variation over fc 75 kHz Rejection 100 kHz to fc-6.0 MHz and fc+6.0 to 540 MHz Ultimate Operating Temperature Range Impedance Matching to 50 unbalanced Case Style Lid Symbolization (YY=year, WW=week, XXX=lot code) Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Max Soldering Profile Sym fc IL BW3 GDV Min Typ 286.000 6 Max 8.0 0.3 100 275 20 TA -40 40 >40 +85 Units MHz dB kHz dBP-P nsP-P dB C Notes 1 1, 2 1, 2, 3 1 External L-C SM8558-8 8.5 x 5.8 mm Nominal Footprint RFM SF1083B YYWWXXX Electrical Connections Connection Terminals Port 1 Hot 7 Port 1 Gnd Return 1 Port 2 Hot 3 Port 2 Gnd Return 5 Case Ground All Others Value Units +10 dBm 30 VDC -40 to +85 C 235C for 90 s Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 and measured with 50 network analyzer. 2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. 4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes." 5. The design, manufacturing process, and specifications of this filter are subject to change. 6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. 7. US and international patents may apply. 8. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. 9. (c)Copyright 1999, RF Monolithics Inc. 10. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. 4347 Sigma Road Dallas, Texas 75244 USA Phone: +1(972)233-2903 Fax: +1(972)387-8148 e-mail: info@rfm.com Home page: www.rfm.com European Sales Office 44 1963 251383 44 1963 251510 SF1083B 7/22/1999 R SF1083B 286 MHz SAW Filter 0 dB -20 -40 -60 -80 -100 20 MHz/DIV 0 dB -2 -6 -8 -10 400 kHz/DIV RF Monolithics, Inc. 4347 Sigma Road Dallas, Texas 75244 USA Phone: +1(972)233-2903 Fax: +1(972)387-8148 e-mail: info@rfm.com Home page: www.rfm.com European Sales Office 44 1963 251383 44 1963 251510 SF1083Bp.DOC 50 ns/DIV -4 SM8558-8 Case 8-Terminal Ceramic Surface-Mount Case 8.5 x 5.8 mm Nominal Footprint Dimension A B C D E F H M N P R Min 8.26 5.59 mm Nom 8.51 5.84 1.70 0.79 1.14 1.98 0.51 0.76 0.51 2.54 0.51 Max 8.76 6.10 2.00 Min 0.325 0.220 Inches Nom 0.335 0.230 0.067 0.031 0.045 0.078 0.020 0.030 0.020 0.100 0.020 Max 0.345 0.240 0.079 B C D (X8) 4 E (X2) 3 5 A 2 6 P (X4) 1 M N8 H Radius R 7 F (X6) RF Monolithics, Inc. Phone: +1(972) 233-2903 Fax: +1(972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo and RFM are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SM8558-8 |
Price & Availability of SF1083B |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |